Gå direkte til innhold

Løpende og avsluttede prosjekter i FNS

Oversikt over godkjente og avsluttede prosjekter. Det kan erfaringsmessig ta noe tid fra et prosjekt godkjennes til det starter. Avsluttede prosjekter er gruppert etter fagområder.

Godkjente prosjekter (2013)

12-05 PIES FPI Enriched Salmon
Norske deltakere: DUE Miljø AS, Nutrimar AS, NOFIMA AS Tromsø
Norsk prosjektleder: Eddy Torp /Paal Skavås
Kontaktinformasjon: eddy.torp@duemiljo.no,  +47 22 73 68 52
Fransk deltaker: Labeyrie AS
Prosjektperiode: 3 år (2012 - 2014)
Fagområde: Membranfilter 
Kort omtale: This Project ”FPI Enriched Salmon” has as its objective to develop and demonstrate a new profitable and more sustainable process for reclaim and utilization of reclaimed salmon matter - being also small/dissolved biomarine rest raw materials with attractive functional capabilities - into consumer seafood products of salmon fish.The processes could also be used for other species.

12-04 Smart Autofocus (SmartAF) Σ! 6808
Norske deltakere: poLight AS, SINTEF, Høyskolen i Vestfold
Norsk prosjektleder: Jon H. Ulvensøen
Kontaktinformasjon: jon@polight.com,  +47 33 07 12 60
Fransk deltaker: DxO
Prosjektperiode: 3 år (2013 - 2015)
Fagområde: Kombinert digital og optisk fokusteknologi

12-03 Pain Monitor to predict development of chronic pain 
Norske deltakere: Med-Storm Innovation AS
Norsk prosjektleder: Hanne Storm
Kontaktinformasjon: hanne.storm@med-storm.com , +47 907 88 976
Fransk deltaker: Hôpital Foch
Prosjektperiode: 3 år (2012 - 2014)
Fagområde: Smertemåling
Kort omtale: Med-Storm’s Pain Monitor is the only medical device available for recording and quantifying acute pain. Clinical and technical integration development of the Pain Monitor will address the demand for the mandatory pain recording and will possibly prevent development of chronic pain.

12-01 Salinity Scan with Prototype Development
Norske deltakere: Tool-Tech AS
Norsk prosjektleder: Magne Rød
Kontaktinformasjon: magne.rod@tool-tech.no , +47 53 41 40 70
Franske deltakere: Euro Techniques Industries (ETI), MTI
Andre deltakere: Frauenhofer IGB (Tyskland)
Prosjektperiode: 3 år (2012 - 2014)
Fagområde: Subsea, brønnstrøm
Kort omtale: The overall goal of the project is to provide better process data than what is currently available from subsea multiphase flow meters. The product is mainly aimed at the subsea after market and shall be a tool in increased oil recovery.

11-08 BITS Bullet Impact on Tissue Simulant Σ! 7594
Norsk deltaker: IMPETUS Afea AS
Norsk prosjektleder: Arve Grønsund Hanssen
Kontaktinformasjon: arve@impetus.no , +47 38 37 66 70
Franske deltakere: IMPETUS Afea SAS
Prosjektperiode: 2 år (2012 - 2014)
Fagområde: Simulering, biomekanikk, GPU
Kort omtale: To establish a numerical framework that can be used to understand the behavior of human or animal tissue subjected to ballistic impacts from projectiles.

11-04 ENVI-BUOY : Environment-monitoring buoy for the aquaculture industry
Norske deltakere: NORTEK AS , AKVA Group as, Acuaculture Engineering AS (SINTEF)
Norsk prosjektleder: Jardar Maatje
Kontaktinformasjon: jardar@nortek-as.com , +47 67 17 45 00
Franske deltakere: NortekMED AS, Universitetet i Toulon
Prosjektperiode: 3 år (2012 - 2005)
Fagområde: Akvakultur, sensorer, overvåkning
Kort omtale: The primary objective is to develop an industrial multi-sensor buoy for the aquaculture industry providing real-time high quality environmental parameters critical to fish farming operation, feed optimization and management.The secondary objective (outside this project) is to commercialize the multi-sensor subsurface buoy in collaboration with the AKVA Group ASA. AKVA Group is the leading (#1) international supplier of aquaculture technology (cages, boats, feed systems, sensor systems and fish farming software).

11-02 SISQUONOR Spatial Information System for aquaculture in Normandy and in Norway
Norske deltakere: CMR Computing, Havforskningsinstituttet, Universitetet i Bergen
Norsk prosjektleder: Øyvind Strand
Kontaktinformasjon: oyvind.strand@imr.no , +47 55 23 63 67
Franske deltakere: IFREMER
Prosjektperiode: 2 år (2013 - 2014)
Fagområde: GIS, oppdrett av skalldyr, beslutningsstøttesystemer

11-10 NANOPLASMONICS – A toolbox for controlling energy transfer
(avventer bekreftelse på fransk støtte)
Norsk deltaker: NTNU Institutt for fysikk, SINTEF Materialer og Kjemi,
Norsk prosjektleder: Ingve Simonsen
Kontaktinformasjon: ingve.simonsen@ntnu.no  +47 73 59 34 17
Franske deltakere: Institut des NanoSciences de Paris, Saint-Gobain Recherche,
Prosjektperiode: 3 år (2012 - 2014)
Fagområde: materialteknologi

6/10 LUCIDMAN: Local User-Centric Identity Management  Σ! 7161
Norske deltakere: VALLVI AS, IFI - Universitetet i Oslo, TELLU AS
Norsk prosjektleder: Petter Taugbøl
Kontaktinformasjon: pt@vallvi.com, +47 90 16 48 72
Franske deltakere: CEV SA, ENSICAEN, TazTag SA
Prosjektperiode: 2 år (2011 - 2012)
Fagområde: IKT
Kort omtale: The objective of this project is to investigate the security and the usability aspects of a user device for client side management of user and service provider identities and credentials. The project will investigate the feasibility of an identity management model where the technology for identity management is located on the user side, conceptually described as a device with a specific set of characteristics which can provide a solution to the known security challenges associated with poor usability and scalability of managing identities on the client side.

3/10 AsousticNose - Compact Photo-Acoustic Mid-Infrared Spectroscopy Sensor for Extended Range of Chemical Agents
Norsk søker: Norsk Elektro Optikk AS
Norsk prosjektleder: Peter Kaspersen
Kontaktinformasjon:  peter@neo.no, 67 97 47 00
Fransk deltaker: Alcatel Thales III-V Lab (Dominique Pons)
Prosjektperiode: 2 år (2010 og 2011)
Fagområde:  Sensorteknologi
Kort omtale: The main goal of the project AcousticNose is to build a highly compact and extremely sensitive gas sensor where the miniaturization of such a system is made possible by extensive use of photonic and microsystems technology.

2/10 MEMS-MOPP-MEMS Monitoring of physiological pressure by implantable
Norsk søker: SINTEF IKT
Norsk prosjektleder: Berit Sundby Avset
Kontaktinformasjon: Ingelin.clausen@sintef.no,  tlf 2206 7381
Fransk deltaker: Tronics S.A. (Stephane Renard)
Prosjektperiode: 2 år, 2010 og 2011
Fagområde: Biomedisinsk instrumentering
Kort omtale: The objective of MOPPMEMS is to develop a smart hip prosthesis with an embedded pressure sensor. The project will explore the use of MEMS technology for in vivo applications and the sensor will provide data on the pressure inside a functional prosthesis joint through clinical research. During the first 8 months of the project a number of miniaturized pressure sensors have been manufactured, tested, and calibrated an a selection of biocompatible protective coatings have been evaluated.

1/09 TMS (TEMASI) System Σ! 4572
Norsk søker: Saint-Gobain Byggevarer as (former Maxit)
Norsk prosjektleder:  Oddvar Hyrve
Kontaktinformasjon: Oddvar.hyrve@saint-gobain.com, tlf 22 88 77 30
Fransk deltaker: MDB Texinov (Jacques Tankere)
Prosjektperiode: 3 år 1.1.2009 – 31.12.2011
Fagområde: Bygg og anlegg (renseteknologi)
Kort omtale: Goals of the project:
• Construct environmentally-friendly and cost effective structures by using an innovative light weight aggregate / geosynthetic composite
• Develop a specific Light Weight Aggregate Minitubes system suitable for different types of infrastructures
• Develop a Light Weight Facing for steep slopes reinforces by the Light Weight Aggregate Minitubes system
• Define the corresponding design approaches & installation methods
 

2/07 Spark plasma sintering of ceramic proton conductors for solid oxide fuel cells
Norsk søker: SINTEF Materialer og Kjemi
Norsk prosjektleder: Marie-Laure Fontaine
Kontaktinformasjon: Marie-laure.fontaine@sintef.no , tlf 9347 9555
Fransk deltaker: CIRIMAT, PNF2, EDF (Claude Estournes)
Prosjektperiode: Desember 2009 – desember 2012
Fagområde: Materialteknologi
Kort omtale: This project aims at making Norway and France more competitive and ahead in the fields of energy technology and chemical production, using processes based on ion conducting membranes for power generation with CO2 capture.

______________________________

Avsluttede prosjekter 1988 - 2011

(gruppert etter tema)

AQUACULTURE, AGRICULTURE AND FOOD INDUSTRY

• Developing system Biofish – Sea Bass, Sea Bream in Mediterranean(Project A and B)
Oppdrett Service AS, Norway (Geirulv)
Scorsa, France (van Obbergen and Guy Lebrun)
Duration 1989 - 1991

• Study of Inter-relations Carotenoides-Vitamines A at salmons
Akvaforsk, Sunndalsøra, Norway (Storebakken)
INRA, Ascain, France (Coubert)
Duration 1989 - 1990

• Air transportation – Norwegian Aquaculture – by ATR 72
Air West A/S, Norway (Wågsæther)
Avions de Transport Régional (ATR), France (Valerio)
Duration 1990 - 1991

• Turbot grower feed. Protein requirement Feed production technology
Norsk Bioakva A/S , Norway (Einar Wathne)
UCAAB, France (Antoine Bon)
Duration 1994 - 1997

• Scallop production – plan for co-operation
Centre for Studies of Environment and Resources, UiB, Norway (Thorolf Magnesen)
IFREMER-Brest-Drv, France (Jean-Claude Dao)
Duration 1994 - 1997

• Control and management of quality with nutrition and feeding regime
Domstein Salmon AS, Norway (Ola Sveen)
Labeyrie SA, France (Laurent de Baynast)
Duration 1995 - 1997

• Biactive compounds in fish and shellfish waste
Institute for Fisheries and Aquaculture, Norway (Asbjørn Gildberg)
Collège de France, Marine Biology Laboratory, France (Yves Le Gal)
Duration 1995 - 1997

• Cellular immune system in salmoned fish
University of Bergen, Fisheries and Marine Biology, Bergen, Norway ( Curt Endresen)
Université Pierre et Marie Curie, CNRS and INRA, Paris, France (Jacques Charlemagne)
Duration 1996 - 1998

• Oral use of Propionibacterium acnes to improve health and growth in fish
Nutreco ARC, Norway, (Alex Obach)
Vétoquinol S.A., France (A. Rigoulot)
Duration 1998 - 1999

• Alternative to antibiotic treatments in marine aquaculture. Application to bivalve larvae
Centre for studies of environment and resources, UiB / Scalpro AS, Norway (T. Magnesen)
UBO-IEUM-UMR CNRS, France (Christine Paillard)
Duration 1999 - 2000

• New quality assessment methods for the Norwegian salmon industry
SINTEF Fiskeri og havbruk and Norway Royal Salmon, Trondheim, Norway (Marit Aursand)
Eurofins Laboratories and Laiem, Nantes, France (Michèle Lees)
Duration: 1998-2001

• Substitution of fish meal by plant protein in diet of Atlantic Salmon and Rainbow Trout
EWOS Innovation AS (NorAqua Innovation AS), Dirdal, Norway (Jan Vidar Jakobsen)
UNCAA DPA UCAAB, Chateau-Thierry, France (Christine Azam)
Duration: 1999 – 2002

• High-energy diets in aquaculture: Effects on salmonid quality
Nutreco ARC AS, Stavanger, Norway (Wolfgang Koppe)
National Institute for Agronomic Research (INRA), France (Geneviève Corraze)
Duration: 2000 - 2003

• Structure, formation and daily growth of the scallop Pecten maximus shell
Institute of Marine Research, Bergen (Øivind Strand)
Institut Universitaire Européen de la Mer (Laurent Chauvaud)
Duration: 2001-2003

• Adaptation of French sea bream technology for cod fingeling production
Bergen Aqua AS, Bergen (Grethe Adoff)
Ferme Marine de Douhet (Fréderic Cachelou)
Duration 2001 - 2003

• Nutraceuticals from fish and shellfish hydrolysates
BioHenk AS, Tromsø (Even Stenberg)
Station de Biologie Marine du Muséum National d’Histoire Naturelle (Yves Le Gal)
Duration: 2002 - 2004

• Blue mussel bioenergetics in aquaculture as modelled with DEB theory
(BlueDEB)
Havforskningsinstituttet (Øyvind Strand)
IFREMER (Marianne Alunno-Bruscia)
Duration: 2010

• Molecular markers to estimate algal diets of molluscs (KLEM)
Uni Miljø Bergen (Christofer Troedsson)
Ifremer (Marianne Alunno-Bruscia)
Duration: 2010 and 2011

BIOTECHNOLOGY / BIO-MEDICINE / BIOCHEMISTRY

• Development of 99-Tc-labelled drugs based upon Biological Substances
Axix Research A/S, Oslo, Norway (Heggli)
Compagnie ORIS Industrie, Gif-sur-Yvette, France (J.C. Saccavini)
Duration 1989 – 1990

• Purification of marine oils by supercritical fluid fractionation
Pronova Biocare, Norway (H. Breivik)
Separex, France (M. Perrut)
Duration 1991 - 1993

• Modelling of molecular recognition – a semi automatic approach
MR Center, Norway (Steffen Petersen)
Biostructure, France (Stéphane Boudon)
Duration 1992 – 1993

• Detection and counting of residual leukocytes
Dynal, Norway (Erik Ruud)
Biocytex, France (Philipe Poncelet)
Duration 1993 - 1994

• Repair of lesions induced in DNA by industrial compounds and drugs
University of Bergen Department of molecular Biology, Bergen, Norway (Niels Aarsæther)
Institut Gustave Roussy, Villejuif, France(Jacques Laval)
Duration: 1998-2001

• The immune system in scallop, Doctoral studies at SARS Centre in Bergen
Doctoral student Armaury Herpin, Laboratoire de Biologie et Biotechnologies Marine, Caen
Duration: 2000-2002

• Development of biochemical procedures and read out platforms for manipulating and analysing nucleic acids
LingVitae, Norway (Preben Lexow)
Pasteur Institut, France (Aaron Bensimon)
Duration: 2001-2003

• The Effect of Bioactive Fatty Acids on Atherosclerosis and Restenosis Development
Thia Medica AS / Clinical Biochemistry Haukeland Hospital, UiB, Norway (Rolf K. Berge)
Institut Pasteur de Lille, France (Bart Staels)
Duration: 2002 – 2004

• Developing genetic tools for real-time non-invasive imaging of turorigenesis in living mice
Cgene AS / University of Oslo (Harald Carlsen and Joel Glover)
Ecole Normale superieure/IPSOGEN (Christo Goridis and Fabienne Hermitte)
Duration: 2005 – 2007

• Developing genetic tools for real time non-invasive imaging of tumorigensis in living mice
Cgene AS (Harald Karlsen) / University of Oslo (Joel Glover)
ENS Paris / IPSOGEN (Christo Goridis / Fabienne Hermitte)
Duration: 2 years 2005 - 2007

• Novel sonosensitive liposomes and systems for targeted ultrasound mediated drug delivery (Σ! 4065)
Epitarget Therapeutica (before CancerCure AS) (Espen Nilssen)
EDAP-TMS SA (Emmanuel Blanc)
Duration: 2007 - 2010
 

CIVIL ENGINEERING

• Prediction creep settlements for foundations in permafrost
Norwegian Geotechnical Institute, Oslo, Norway (Tom Lunne)
GEOCEAN, Marseille, France (Alain Puech)
Duration 1991

• Submarine Slides
Norwegian Geotechnical Institute, Oslo, Norway (Harald Norem)
CEMAGREF, Division Nivologie, St. Martin D’Heres, France (Gerard Brugnot)
Duration 1991 - 1992

• Geosynthetics for innovative sustainable solutions in Arctic climate
Store Norske Spitsbergen Grubekompan / SINTEF (Arnstein Watn)
TenCate Geosynthetics France (Philippe Delmas)
Duration: 3 years 2006 – 2009 (Σ! 3702)

ENERGY SAVING AND ENVIRONMENTAL TECHNOLOGY

• Technology transfer in water technology
Aquateam, Norway (Schanke Eikum)
Verseau, France (Lagarrique)
Duration 1990 – 1991

• Integration of a gas turbine in a high speed vessel
Ulstein International AS, Norway (Harald Nordal)
Turbomeca, France (Watier)
Duration 1991 - 1992

• Anode gas cleaning. Installation and operation of a Pilot Plant
Elkem Aluminium ANS, Norway (Arne G. Berg)
Procedair SA, France (Serge Commenges)
Duration 1997

• Wet Air Oxidation by Catalytic Membrane Contactor
SINTEF Material Technology / Due Miljø, Norway (Henrik Ræder)
Institut de Recherches sur la Catalyse (IRC)-CNRS, France (P. Gallezot)
Duration 1998 – 2000

• Current forecasting in the North Sea and the Gulf of Lion
Terra Orbit AS (Laurent Bertino)
Actimar SA (Raymond Nerzic)
Duration: 3 years 2006 - 2008

• Stabilisation of top of the line corrosion rate
Institutt for energiteknikk (IFE) / Total Norge / Norske Conoco Phillips ( Arne Dugstad)
Total S.A / ENSEE Grenoble (Yves Gunaltun)
Duration: 3 years 2006 – 2008

• Industrialisation of the Watercatox process for waste water treatment and liquid oxidation
Due miljø (Eddy Torp and Partow Henriksen)
Tredi (Sylvain Durecu)
Duration: 1.1.2008 – 2009

INFORMATION / TELECOMMUNICATION TECHNOLOGIES / ROBOTICS

• Fibre Optic Technology
Alcatel STK, Norway (Flaarønning)
Lab. de Marcoussis, France (Torchin)
Duration 1989 – 1990

• Computer aided navigation of mobile robots using animated synthetic images
SINTEF, Norway (V. Kallevik)
CYBERNETIX, France (P. Baraona, D. Sangouard)
Duration 1990 - 1991

• ACM, Advanced Configuration Management (NOMADE + EPOS)
Norwegian Institut of Technology, Trondheim, Norway (Conradi)
LGI, Nomade Team, Grenoble, France (Estublier)
Duration 1991 - 1992

• Interactive home support systems for protected housing
Man Machine Technology AS, Norway (Anderson)
Pierron SA, France (Viala, Legrand)
Duration 1992 - 1993

• Eviacsim – An interactive evacuation simulation system tool
A/S Quasar Consultants, Norway (K. Harald Drager)
Simulog, France (Bruno Arbaud)
Duration 1992 - 1993

• High performance safety and security detector field bus
Autronica AS, Trondheim, Norway (Gunnar Haveland)
Automatismes Sicly, Le Blanc-Mesnil, France (Thierry Chabot)
Duration 1994 - 1997

• TRICAD – Triangulation of CAD geometries
ViewTech, Norway (Tor Helge Hansen)
Transvalor, France (Etienne Wey)
Duration 1999 - 2000

• Secure software distribution and payment over Internet
Sospita AS (Protective Technology), Mandal, Norway (Ulf Carlsen)
Gemplus, Gémenos, France (Pierre Girard)
Duration: 1999-2001

• HP-Sim: High Performance Seismic Imaging)
Para//ab / Norsk Hydro, Bergen, Norway (Tor Sørevik)
Armines-Geophysique, Fontainebleau, France (Philippe Thierry)
Duration: 2000-2001

• 3D Geometry System integrated with haptic and kinaesthetic solutions
Compu Touch AS, Norway (Frank Robert Berg)
Atomic Energy Commission, France (CEA) (Guy Le Bras)
Duration: 2001-2002

• Software Components for Building Complex 3D Geological Models (2001-2003)
GeoCap AS, Norway (Olav Egeland)
Armines / IFP, France (Jean-François Rainaud)

• Medical Device Software Assessment for Certification
Det Norske Veritas AS, Oslo, Norway (Torbjørn Skramstad)
ISOSCOPE, Toulouse, France (Christian Rouve)
Duration: 2000 - 2004

• Simulation and planning for Robotic Education and Distant Surgery
Sim Surgery AS, Norway (Jan Sigurd Røtnes)
IRCAD, France (Luc Soler)
Duration: 2003-2004

• Development of innovative IT solutions for Shipbrokers
Unified Messaging Systems, Norway (UMS) (Harald Lindbäck)
AXS Marine SA, France (Fabrice Demichel)
Duration: 2003-2004

• Modelling electricity prices in European markets with an emphasis on risk analyses
Kjell Magnus Maribu – postdoctoral studies at École des Mines de Paris
Duration : Six months 2006

• Localisation of drifting objects and decision aid system for maritime search and rescue (SAR)
CMR Computing / Met.no (Kjell Røang)
ACTIMAR / IFREMER (Raymond Nerzic)
Duration: 2006 – 2008 (Σ! 3652)

• NextGenFSI: Next generation numerical code for fluid-structure interation
Impetus Afea (Arve Grønsund Hanssen)
SARL Impetus Afea (Jean Luc Lacome) 
Duration: 2010

• STERIPROBE – Development and industrialization of ulstrasound probes for steril processing                (Σ! 4980)
Sonowand AS (Atle Kleven) 
Vermon S.A. (Philippe Auclair)
Duration: 2009-2010 

• NextGenFSI: Next generation numerical code for fluid-structure interation
Impetus Afea (Arve Grønsund Hanssen)
SARL Impetus Afea (Jean Luc Lacome)
Duration: 2010

• STERIPROBE – Development and industrialization of ulstrasound probes for steril processing ((Σ! 4980)
Sonowand AS (Atle Kleven)
Vermon S.A. (Philippe Auclair)
Duration: 2009-2010 
 

MATERIAL SCIENCE AND TECHNOLOGY / MARINE TECHNOLOGY

 • Advanced light metals for car engines
Hydro Aluminium, Sunndalsøra, Norway (L. Auran)
PSA Velizy, France (R. Moore)
Duration 1988-1992

• Postal container for ATR
Hydro Aluminium, Norway
Avions de Transport Regional (ATR), France
Duration 1990 - 1991

• Microstructurally based modelling of plastic anisotropy
Hydro Aluminium, Metallurgical R&D Center, Sunndalsøra, Norway (A. Aaflot)
Pechiney Recherche, Voreppe, France (B. Marandet)
Duration 1991 -1992

• Recovery of Aluminium Alloys
Hydro Aluminium, R&D Materials Technology, Norway (Trond Furu)
Pechiney CRV, France (D. Duly)
Duration 1993 - 1996

• Modelling and improved cooling of aluminium extruded sections
Hydro Aluminium, R&D Materials Technology, Norway (Antonie Oosterkamp)
Bertin & Cie, France (J. Street)
Duration 1994 - 1997

• Electrophoretic and sol-gel methods for anticorrosive mineral coatings
SINTEF Materials Technology, Norway (Christian Simon)
Institut Français du Petrole, France (Benjamin Cabot)
Duration 1994 – 1997

• Piezo-composites in underwater transducers
Simrad Norge AS, Horten, Norway (Helge Bodholt)
Imasonic, Besanςon, France (Gerard Fleury)
Duration 1996 - 1998

• Carbon particle upgrading by plasma
SINTEF/NTNU, Norway (Jon Arne Bakken)
ARMINES, Centre d’Energétique, Sophia Antipolis, France (Laurent Fulcheri)
Duration 1998

• Development of high performance and safety improved work clothing for the oil industry
SINTEF Unimed, Øglænd Pioner, Norway (Arvid Påsche)
Pinatel et Chapuis Textiles, France (Pierre Baleix)
Duration 1998 - 1999

• Inductive plasma purification of metallurgical silicon using inductive plasma in order to obtain silicon with purity suitable for solar cell manufacturing
Elkem ASA, Kristiansand, Norway (Pål Runde)
PREMIS Technologies, Ascoux, France (N. Perrodin)
Duration: 1999 – 2001

• High temperature pressure sensor (2000 - 2001 )
PreSens, Oslo, Norway (Frode Meringdal)
Cea Leti, Grenoble, France (Bernard Diem)
Duration: 2000 - 2001

• Aluminium components subjected to impact loading conditions
SIMlab, NTNU / SINTEF / Hydro Aluminium, Norway (Magnus Langseth)
LMT-Cachan / Renault, France (Ahmed Benallal)
Duration: 2003-2005

• Novel silicon feedstock by agglomeration of silicon powder and further refining by thermal treatment and reactive metallurgy
Silicon Technologies AS, Norway (Bruno Ceccaroli)
EMIX SA, France (Didier Landaud)
Duration: 2005

• Up-scaling of advanced ceramic membrane processes for fish oil separation
Due Miljø/SINTEF, Norway (Eddy Torp and Bente G. Tilset)
CTPP / Novasep Orelis, France (Charles Delonnoy)
Duration: 3 years 2005 - 2007 (Σ! 3198)

• New process for solar silicon. Refining by thermal treatment and reactive metallurgy
Rec Silicon AS, Norway (Bruno Ceccaroli / Erik Sauar)
EMIX S.A, France. (Didier Landaud)
Duration: 3 years 2006 – 2008 (Σ! 3314)

• Intercepting HISC by ultrasonic residual stress measurements
Det Norske Veritas (Majid Anvari)
Ultra RS (Siamack Atiabi)
Duration: 1 year - 2006/07 (Finished in September 2009)

• Conception, development and testing of new aluminium casting alloys for elevated temperature applications in automobile engines
Hydro Aluminium (Petter Åsholt)
Montupet (Bruno Barlas)
Duration: 3 years 1.7.2006 – 30.6.2009 (Σ! 3698)

• Evaluation of Ready To Use crucibles for the crystallization of multi crystallised silicon ingot
NTNU, Material Science (Lars Arneberg)
Vesuvius France (Christian Martin)
Duration: 1 year 2008/09
 
• Isotope separation of silicon for use in the photovoltaic industry
Isosilicon AS (Dag Øistein Eriksen)
Novesep Process SAS (Pierre Hilaireau)
Duration: 2008 - 2010

• ALU-NANO: Development of spherical sub-micron/nano-sized alumina for advanced refractories
Elkem Silikon Materials (Harald Schreiner)
Kerneos SA (Chris Parr)
Duration: 2010 (stopped) 

OIL AND GAS INDUSTRY, OFFSHORE TECHNOLOGY

• Feasibility Study on Natural Gas Distribution in North Rogaland
Gasmet A/S, Forus, Norway (Rolf Rønningen)
Sofregaz, Paris, France (Saillard)
Duration 1989

• Deep Diver External Monitoring
SINTEF, Trondheim, Norway (Arvid Påsche)
COMEX SA, Marseille, France (Imbert)
Duration 1989 - 1990

• Drilling and production operation for offshore field on Norwegian waters with the
Jack-up TPG 500
Wiltech Production System (WPS), Oslo, Norway (Robert Reed)
Technip Geoproduction, Paris, France (Pierre-Armand Thomas)
Duration 1989 - 1990

• Vertical resonant motions of tension leg platforms
Norwegian Institute of Technology, Trondheim, Norway (Geir Moe)
IFP, Rueil Malmaison, France (B. Molin)
Duration 1989 - 1990

• Diver survival equipment
SINTEF, Trondheim (Arvid Påsche) and Statoil/Norsk Hydro/OD, Norway
COMEX S.A., Marseille, France (Jean Pierre Imbert)
Duration 1989 - 1990

• Concrete semi-submersible production platform with rigid well risers
Oddfjell Drilling and Consulting Co. A/S, Kokstad, Norway (A.K. Nilsen)
Doris Engineering, Paris, France (J. Martin)
Duration 1991 - 1992

• Offshore loading system for LNG and LPG
Seanor Engineering a.s., Norway (Oddvar Bøyesen)
FMC EUROPE S.A, France. (Chris Pashalis)
Duration 1992 - 1994

• Gas leak detection (GLD) system for pipelines
Simrad Marine, Norway (Kjell Dalland)
Metravib, France (Pierre Schindler)
Duration 1993 - 1994

• Development of methods for inspection of steel layers in flexible pipes
Robit, Norway (Morten Eriksen)
Coflexip, France (Barthelemy Laurant)
Duration 1993 - 1994

• New Multilevel downhole seismic acquisition system
READ Well Services AS, Norway (Karl A. Berteussen)
IFP, Rueil Malmaison, France (Jean Laurent)
Duration 1994 - 1996

• A new generation of zeolite catalyst for hydrocracking
Statoil Research Centre, Norway (Bente Bøe)
Institut Français du Pétrole, France (Eric Benazzi)
Duration 1997 - 2000

• Travel support in connection with the establishment of possible co-operation between NTNU and IFP
Professor Gudmundsson, NTNU, Trondheim, Norway
Duration 1998

• Fatigue behaviour of offshore loading hoses
Advanced Production and Loading (APL) AS, Norway (Jan V. Aarsnes)
Trelleborg Kleber Industries, France (Jacques Cognard)
Duration 1999 – 2000

• Increased Field Profitability by Improved Uncertainty Management
Det Norske Veritas (DNV), Norway (Øivind Johnsen)
Institut Français du Pétrole (IFP), France (Daniel Averbuch)
Duration 2002 - 2003

• Application of a new encapsulation process in petrochemistry
KeraNor/SINTEF Materials Technology, Norway (Christian Simon)
Institut Français du Pétrole/Université de Franche-Comté, France (Alain Fossy)
Duration: 2002 – 2004 (Extended to a EU project (NANOCAPS) in March 2004

• Stabilisation of the top of the gas lines corrosion rate
Institutt for energiteknikk (IFE) / Total Norge / Norske Conoco Phillips, Norway
(Arne Dugstad)
Total S.A / ENSEE Grenoble, France (Yves Gunaltun)
Duration: 3 years 2006 - 2008

• New Solution for Deck Installation and Decommissioning : Deck Structure Installation Vessel
Det Norske Veritas AS (Siamack Atiabi)
Technip (Pierre Armand Thomas)
Duration : 2010-2011
 

SPACE TECHNOLOGY

• Aerospace Vehicle Numerical Flow Simulation and Wind Tunnel Test
CFD, Trondheim, Norway (Helge Nørstrud)
Aerospatiale, Toulouse, France (Corinne Rey)
Duration 1990 - 1992

• Technology Program – Thermal Protection Materials for Propulsion Systems
Raufoss, Norway (Haugen)
SNPE Paris, France (Faure)
Duration 1992 - 1993

• Zeolite Synthesis under Microgravity
SINTEF (SI), Norway (Stöcker)
Université de Paris VI+VII, France (Robert)
Duration 1991 - 1992

• Save filter bank for flexible multi beam payload
Ame Space, Norway (Øivind Andreasen)
Alcatel Espace, France (Herve Snorre)
Duration 1993 - 1995

• French / Norwegian study of increased space technology industrial co-operation
Europavia Norge A/S, Norway (J.C. Width)
CNES, France (Yves Rebillard)
Duration 1993

• Development of adaptive mesh for space propulsion systems
CDF Norway AS, Norway (Helge Nørstrud)
SNECMA, France
Duration 1994 - 1996

• Development of a bi-propellant flow control valve for satellite propulsion
Raufoss Technology AS, Raufoss, Norway (Per Eger)
Aerospatiale Espace Défense, Les Mureaux, France (J. Astier)
Duration 1996 – 1998

• Introduction to the French Aerospace Industry
Einar Sørensen, Norway
Duration 1999

MISCELLANEOUS

• Olympic winter games – Albertville 1992 / Lillehammer 1994
Potential fields of industrial co-operation
NIA, Norway(Per Axel Prydz)
COJO/LOOC. France
Duration 1991 – 1992

• Creative project – 1st step marketing study
Statoil, Norway (EUREKA support)
CETIM, France (FNS support)
Duration 1993

• Development of a new generation self-contained closed circuit breathing apparatus
Thelma AS, Norway (Arvid Påsche)
Fenzy S.A, France (Robert Michel)
Duration: 2001 – 2002

• Developing an Intangible Asset Valuation Tool
InSpire Invest AS (Jan-Olaf Willums)
Integral Development Asset Management (Antoine Dehen)
Duration: 2005/06

• Consumer conceptions of local food
SIFO (Virgenie Amilien)
INRA and UMR MOISA (Fatiha Fort)
Duration: 2005 - 2007
 

 

 

Publisert:
 10.03.2010